Replacement Rear Cover for L Series Control Units C12L and C24L
To remove the rear cover, simply unscrew the 5 screws from the cover. Lift the cover off vertically to avoid disturbing any internal connections.
When closing the new rear cover be sure to wiggle the lid over the foam covered SPV4 pump to ensure the correct fit. Replace the screws to finalise the rear cover replacement.
Use the existing screws that came with your controller. Screws not included with the replacement rear panel.
Identify which C12 or C24 model you have
If you are unsure which model of C12 or C24 you have you can tell by inside of the Rear Cover.
C Series Models 2015 and earlier - Include a battery holder and wire, and a pump support that is shorter than the height of the battery holder to accommodate the original IRR-SPV pump
C Series Models 2016 and later - Include a battery holder, and a pump support that is the same height as the battery holder to accommodate the larger IRR-SPV2 pump
L Series Models 2020 and later - Does not feature a battery holder, and has large pump support to accommodate the foam covered IRR-SPV4 pump.